ET30S stock firmwar...
 
Notifications
Clear all

ET30S stock firmware

kaxemor
(@kaxemor)
New Member

Hi there,

I recently bought the ET30S projector (without internal battery) and I found on google this page with an update: https://forum.aunstore.com/download/aun-et30s-android-6-0-firmware

So I followed the same steps described here: https://forum.aunstore.com/community/aun-akey6s/aun-akey6s-android-6-0-stock-firmware-upgrade-build_200810/  but then my projector is not turning on, it shows a black screen without the android logo and the light coming out from the lens is very soft compared with when it was working.

I was wondering if there is a way to reset to the stock firmware.

Quote
Topic starter Posted : 12/01/2021 7:47 pm
Topic Tags
jeyoded
(@jeyoded)
New Member

Did you exactly follow the procedure? And are you sure you have the S version (Android) and not the basic version?

ReplyQuote
Posted : 17/01/2021 10:09 am
globecen
(@globecen)
New Member

J'ai eu le même problème et je ne peux pas envoyer de mail a aun....

ReplyQuote
Posted : 29/01/2021 6:49 pm
Reinhard
(@reinhard)
New Member

What is the password for download ? how can i knonw if i have new or old hardware / firmware

ReplyQuote
Posted : 14/04/2021 11:31 am